PIE Logo with Company Name02

Simulators and calibrators for temperature and miliamp, high accuracy

Piecal 334 Piecal 334Plus
Piecal 434
PIECAL-510B PIECAL-511B
Evolution 311 Prelim Rev B  from Photoshop04
PIECAL-520 PIECAL-521B
Piecal 322 Piecal 422

PIECAL 334 Milliamp Loop Calibrator

PIECAL 334Plus Milliamp Loop Diagnostic Calibrator
Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA
Read 0.00 to 52.00 mA
Read -99.99 to 99.99 V
Simulate 2-Wire Transmitters; Power & Read 2-Wire Transmitters
Pical 334 Accurate to ±0.025% of Span at 4.00 & 20.00 * Piecal 334Plus Accurate to ±(0.02% of Reading + 0.002 mA)
EZ-CHECK outputs , Includes Rubber Boot and Attached Test Leads; Low profile switches resist accidental damage
•
Simple Battery Changes
Separate compartment for no-tool battery changes with four inexpensive "AA" batteries
•
Optional Accessories
AC Adaptor 120V (020-0101); 240V (020-0100); Carrying Case (020-0205);
Improvements over 334s from other manufacturers include better longer term stability, accuracy, reliability & ruggedness plus improved battery life. PIECAL 334 is the perfect replacement for your worn out mA calibrators!

High Accuracy Milliamp Loop Diagnostic Calibrator
PIECAL 434

Source 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA
Read 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA
Read -99.99 to 99.99 V
Simulate 2-Wire Transmitter, Power & Read Transmitters
Menu Selectable 250 Ohm resistor for HART compatibility
•
Calibrate with Lab Accuracy
Accurate to ±(0.01% of Reading + 0.002 mA)
PIECAL 434 is
more accurate than similar calibrators - within ±0.004 mA at 20 mA output! • Easty-to-Read Backlit Display • Locate Loop Current Leakages
Automatic indication of Loop Current and Leakage Current. Measure ground current leakage from faulty wiring, flooded conduit and corrosion bridges. Leakage typically appears as a
Zero Shift and helps you decide if the transmitter needs calibration or if there is a problem in the loop wiring. • Faster Calibrations
Three output EZ-CHECK switch
2 speed EZ-DIAL
Stepping & Ramping
•
Includes Rubber Boot & Test Leads • Optional Accessories
AC Adaptor 120 V (020-0101); 240 V (020-0100)
 

PIECAL 510B Single RTD Simulator PIECAL 511 Multiple RTD

The PIECAL Model 510B simulates RTD resistances into all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. The PIECAL 510B is a superior replacement for decade boxes,

  • · Accurate to ±0.25°C (±0.5°F) for Pt 100 Ohm RTD's with 0.1° Resolution
  • · Selectable °C or °F
  • · Several Manufacturers RTD Curves Available- plus custom curves Platinum, Copper & Nickel
  • · Guaranteed to Work with All Pulsed Instruments
  • · Works with a wide variety of transmitters including popular Rosemount and Honeywell Models
  • · Compatible with devices using pulsed excitation currents including PLCs, DCS, Recorders, and all others.
  • · EZ-Dial™ Knob with two dialing speeds makes adjusting output easy
  • · EZ-Check™ switch can store settings for 0% and 100% span adjustments
  • · Uses standard "AA" Alkaline Batteries
  • · Superior battery life of 45 hours under typical continuous usage
  • · Protected to 60V
  • · Optional Rubber Boot, Carrying case and Test Data available
  • · NIST Traceable Calibration Certificate included FREE

PIECAL 211Automated RTD Calibrator

PIECAL 311 Automated RTD Calibrator
Resolution to 0.1 °F & °C; Accurate to 0.2° • Source and Read Multiple RTD Curves plus Ω

Piecal 311Secondary display of Ω?
Accurate to ±0.025% of Span at 4.00 & 20.00
Platinum 100 Ω?: 1.3850, 1.3902, 1.3926
Platinum 1000 Ω?: 1.3850, 1.3750 (Pt 1000 Ω? limited to 266.0°C/511.0°F)
Copper 10 & 50 Ω?; 0.00 to 2001.0 Ω?
Custom ranges available - consult factory
•
Automatically Detect 2, 3 & 4 Wire Connections
Troubleshoot sensor connections & find broken wires with patented technology
•
Guaranteed Compatible with all Instrumentation
Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs, Multi-channel Recorders and other pulsed excitation devices.
•
Faster Calibration
Instantly select three outputs with EZ-CHECK switch
Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
•
Easily Change RTD Types & Scale
Double click to select RTD Type & °F & °C
•
Easy-to-Read Display
Turn on the backlight to read in dark areas of the plant
•
Simple "No Tool" Battery Changes
Four inexpensive "AA" batteries
•
Use in the Plant, Field or Shop
Includes Rubber Boot and RTD Wire Kit (020-0208)

 

PIECAL 521B 14 T/C Types Plus mV Source PIECAL 520B 4 T/C

The PIECAL 521B Thermocouple Source simulates a standard thermocouple curve over the entire industrial temperature range. The PIECAL 521B provides precise temperatures for inputs to all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. The PIECAL 521B has a miniature thermocouple connector on the top end for fast connections. The PIECAL 521B offers the highest performance and functions in its class b

  • · Accuracy ±(0.015% of mV Setting + 0.009mV)
  • · Calibrate in temperature for your T/C type
  • · Adjustable temperature output in selectable 0.1°C or 0.1°F steps
  • · Types J, K, E, T, R, S, B, N, G, C, D, L, U and mV
  • · Typical accuracy of ±0.35°C (0.5°) for Type K
  • · EZ-Dial™ knob easily adjust output by 0.1°C or 0.1°F
  • · Three position EZ-Check™ switch for 0% and 100% span adjustments
  • · Uses standard "AA" Alkaline Batteries
  • · Superior battery life of 45 hours under typical continuous usage
  • · Lightweight and Rugged with a Solid Feel
  • · Small and tough
  • · Protected to 60V
  • · Optional Rubber Boot, Wire kits and carrying case available
  • · NIST Traceable Calibration Certificate included FREE

PIECAL 422 Automated Thermocouple Calibrator - 14 T/C Type
•
Source and Read Fourteen T/C Types plus mV * Piecal 322 4 T/C types
J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel): -13.000 to 80.000 mV
•
Calibrate with Confidence
Resolution to 0.1 °F & °C; Accurate to 0.2°
•
Faster Calibrations
Instantly select three outputs with EZ-CHECK switch
Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
•
Easily Change T/C Types & Scale
Double click to select T/C type & °F & °C
•
Easy-to-Read Display
Turn on the backlight to read in dark areas of the plant
•
Use in the Plant, Field or Shop
Includes Rubber Boot and mV Test Leads
Low profile switches resist accidental damage
•
Simple "No Tool" Battery Changes
Four inexpensive "AA" batteries
•
Verify Cold Junction Temperature & Output
Secondary Display of compensated millivolt setting and cold junction temperature
•
Optional Accessories
Wire & Mini T/C Plug: J, T, E, K (020-0202); B, R/S, K (020-0203)

For more information IPPN Measurements & ControlsVOF Tel.: +31 314 667748 or Email info@ippn.nl

[Home] [Dutch] [English] [Deutsch]